SMART-BOND - HS SERIES
Polymer Encapsulating Absorbents -

H Series for Synthetic Hydrocarbon Spills

Smart-Bond HS Polymer Encapsulating Absorbent has the ability to bond with synthetic and organic hydrocarbon spills including motor oils, brake fluids, transmission fluids and most liquid hydrocarbons, to form a solid mass. The bonding, encapsulating and solidification can be accomplished on hard surfaces and in water, producing a solid and manageable waste product that will not drip. The hardened waste product usually appears within 10 to 15 minutes after application, or sooner. The encapsulating process between the liquid hydrocarbon and the polymer begins immediately on contact. Suitable for use on concrete, asphalt and even sand.

Smart-Bond HS

•  HS Polymers suppress vapours and reduce off gassing by 80% within first five minutes.
•  Completely hydrophobic and will float even after maximum encapsulation and solidification.
•  Cleans up fast with no sweeping on most spills – simplifies fluid spill pickups.
•  As landfill, the Smart-Bond non-biodegradable polymer will never leach.
•  Smart-Bond H Series is environmentally safe and harmless to fish and wildlife.
•  Gases/vapours are trapped, eliminating spontaneous or accidental combustion –
eliminates all hazards. BTU value of 18,602 produces virtually no ash residue.
•  HS polymers are FDA Food Grade and are non-toxic, non-corrosive and non-carcinogenic.
•  No protection needed, creating safer working conditions, lower exposure risks and reduced liabilities.
•  Totally effective and cost efficient resulting in the elimination of hazardous waste costs.
•  Uses much less than ‘absorbents’ and due to encapsulation, generates a fraction of the waste.
•  Smart-Bond HS Polymers only bond with the non-dissolved portion of the hydrocarbon
molecules leaving the water free.
•  HS polymers have an indefinite shelf life.

Applications: Race tracks, garages, boats and Marinas, Gas Stations, Oil tanks, Hydraulic Equipment, anywhere you have synthetic hydrocarbon fluids.

Based on multiple independent studies, that the polymers far exceed the physical properties and capabilities of the conventional products such as cellulose, spun poly-propylene, ethylene, saw dust, peat-moss, ground foams, clay based absorbents and other such products. Smart-Bond provides the only acceptable environmentally sensible alternative to clays, mineral grains, polypropylenes & various silica combinations.

FACTS: A 75 -GALLON SPILL
•  Smart Bond used eight (8) 3” x 10’ socks.....Generates less than a cubic yard.
•  Competitors used forty-one (41) 3” x 10’ socks.....Generates more than 2 1/2 yards of Cubic waste.

Tests show: that 40grams of Smart Bond Polymer will absorb, encapsulate and solidify 150millilitres of oil.In comparison, it would take 400grams of “Speddi -Dri” to absorb the same amount of oil, which would produce 10 times more hazardous waste. (Smart Bond Polymers produce non-hazardous waste and can be used as landfills.)

ABSORPTION RATES
PER 1 KG OF SMART-BOND H SERIES
Petrol 23.398 Lts   Diesel 8.02 Lts  
Kerosene 11.36 Lts   Crude Oil 10.02 Lts

SMART-BOND - AA SERIES
Polymer Encapsulating Absorbents -

A Series for aqueous liquids and water soluble
hydrocarbons, (e.g.Engine Coolant, (Glycol), Acids, Caustics, Bodily Fluids, Methanol, Cutting Fluids).

Smart-Bond AA

•  A Series Encapsulating Polymer solidifies and stabilises hazardous liquids.
•  Series A Polymer has a typical absorption rate of up to 300 times its own weight in neutral water.
•  The A Series Polymer will absorb water from organic or synthetic hydrocarbons, removing water from the hydrocarbons.
•  Smart-Bond absorbs heavy metals and other dissolved solids that may be in liquid.
•  Smart-Bond will encapsulate any liquid with a Ph of 3 or above.
•  When incinerated, Smart-Bond produces no ash.
•  Smart-Bond Aqueous is hydrophilic. (No weighting is required.)
•  Fast acting & safe. Encapsulation, stabilisation, immobilisation & solidification begins immediately.
•  Forms a solid mass that is non-hazardous and safe to transport and dispose.

   

•  All water will be released at various rates of evaporation, based upon ambient temperature and humidity, leaving a hard diamond like granular texture that can be disposed of safely.
•  Safe to use as landfill. As a landfill waste, the polymer will never leach or release any of the encapsulated material.
•  Indefinite shelf life and a microbiological half-life in excess of 400 years.
•  Applications: Junk Yards, Auto body, Race Tracks, Garages, Boats and Marinas, Gas Stations, Oil Tanks, Anywhere you have Aqueous Solutions.

    

(1)The A Series is added first and because it is heavier than water it sinks to the bottom and begins to bond with the water.
(2) Next the H Series is added and because it is heavier than oil it remains on the surface.
(3) Any oil separates from the water and rises to the surface.
(4) Resultant waste can be processed separately.

Technical Data:
Ingredients.....Specific chemical identities withheld under Trade Secret Status.
Chemical Name:.....Proprietary Mixture
Chemical Family:.....Block Copolymer
Hazard Rating:......Fire: 0 Toxicity: 0 Reactivity: 0
Hazard Class:.....Non-hazardous

 

Disclaimer: “While the information herein is believed to be reliable, no guarantee is made as to its accuracy of completeness. The condition of use, handling, storage and disposal and the suitability of the product for particular uses are beyond our control. Consequently, all risks involving the use of the product are assumed by the user. We expressly disclaim all warranties of every kind and nature, expressed or implied, including the warranties of merchantability and fitness for a particular purpose. For more information see the corresponding MSDS.”